Loading Events

« All Events

Solder Paste Evaluation & Simple Tricks

February 11, 2019 @ 2:30 pm - 4:00 pm

| £65 Book a place for this online webinar

All webinar times shown are UK time – to check your local time in your countries Click Here

Solder paste quality and performance is significantly important and considerable engineering goes into its production. Selecting the best materials for your product and assembly process is key to high yield and your customers satisfaction. Solder paste must be compatible with your equipment and other processes you use like, cleaning, coating and electrical test. Working with suppliers to achieve the best performance is vital but so is periodic review of materials used

There are always improvements being made to printing and jetting technology and its important that engineers consider are there technical or commercial reason to change. We look at common testing methods and some of the simple shop floor techniques used over the years to understand the different types of process failures

In preparation for the event and to ensure you are equipped to get maximum benefit from the event, read our Webinar Guide

Presented by Bob Willis

Topics included in our webinar:

Solder paste type
Low & high temperature alloys
Solder beading
Solder slump
Reflow spitting
Flux condensation
Printing trials & test boards
Common paste & print failures

After the webinar there is a Q&A session which provides ample time for all delegate questions to be answered. However, if a delegate has a process example they would like cover in the webinar it will need to be provided in advance of the session

The webinar will run for between 60-90min with question and answer session. The webinars are limited to 100 delegates/companies. A copy of each of the slides presented will be provided after the webinar

Details

Date:
February 11, 2019
Time:
2:30 pm - 4:00 pm
Cost:
£65
Event Category:

Venue

Online Webinar
United Kingdom