was successfully added to your cart.
Loading Events

« All Events

  • This event has passed.

Robotic Soldering Using Laser & Iron Soldering in Production – Webinar

May 14 @ 2:30 pm - 4:00 pm

| £65 Book a place for this online webinar

In preparation for the event and to ensure you are equipped to get the maximum benefit from the event, please read our simple Webinar Guidelines https://www.bobwillis.co.uk/wp-content/uploads/2017/01/WebinarAttendance2017.pdf

Practical guide to the use of robotic soldering irons and laser soldering on printed board assemblies will be covered in this webinar along with the use of different alloys and substrates. Most of the work reported is covered in two NPL reports on through hole soldering When we start to talk about high temperature electronics it’s not the solder it’s all the parts that make up an electronic assembly. Substrates, components, connectors, cables, solder and all of the assembly process needs to be examined in detail. Some newer techniques of soldering can reduce the stress on boards and components and also need through put requirements of modern manufacture. Working at high temperature means between 150-200oC, however, there are many applications that have to work at much higher levels, up to 300oC. Typically, the industries affected by these hostile working conductions include, aerospace, automotive, petrochemical and military. The use of selective soldering is used with high temperature materials and more recently there is a growth in the use of robotic laser and iron soldering. These systems are being used telecom and automotive producers with different cored wire combinations

The webinar is a mixture or theory and practical assembly trial evaluation results with current and future technology using selective soldering plus laser and robotic iron soldering processes at NPL National Physical Laboratory. A FREE copy of the High Temperature Electronics Defect Guide will be provided to each delegate. The defect charts can be printed on site for future reference or training. A guide to major reference sources and publication on high temperature manufacture will be discussed and suppliers providing different assembly resources

Topics include:

Reference books, specification and standards
Product temperature range
Component compatibility
PCB substrate choices & specifications and design
Soldering alloy choices
Assembly & soldering options
Setting up and assessment
Process and quality control
Process failures in automated soldering

The webinar will run for between 60-90min with question and answer session. The webinars are limited to 100 delegates/companies. A copy of each of the slides presented will be provided after the webinar

All webinar times shown are UK time – to check your local time in your countries click here

Details

Date:
May 14
Time:
2:30 pm - 4:00 pm
Cost:
£65

Venue

Online Webinar
United Kingdom

Organiser

Bob Willis
Phone:
(44) 01245 351502
Email:
bob@bobwillis.co.uk
Website:
www.bobwillis.co.uk