| |
| This
CD ROM provides a guide to all aspects of wave soldering with
all the common process defects and lead-free. Each stage of
the process including fluxing, pre heat, solder wave and conveyors
are explained. The defect guide also includes defects specifically
on printed boards and components which can cause soldering
problems. At the first screen you can select the soldering
process, equipment set-up, quality control, defect guide and
CD ROM operation. Selecting the process you want to view takes
you to each section, here you have access to a large manual
on wave soldering including change for lead-free. As an example
in the fluxing section details of foam, spray, wave and dip
fluxing systems are explained along with video clips and still
photographs. |
|
 |
Also
included on the CD ROM are procedures for Parts Per Million
Monitoring, process control procedures and set-up methods.
A spreadsheet is provided which may be used for defect monitoring
using the PPM procedure. The defect guide browser provides
examples of defects rather than defect categories which
makes it easy to compare process problems with the disk
content. Clicking on the photograph provides a full screen
view with an explanation of the possible causes. Each process
stage is described in detail with suggested modification
to the process for lead-free alloy introduction.
More
details can be found here. |
|
|
|
